Custom made Network patch cords Cat 5E Shielded cable
To chose the cable you desire please use the cable selector at the end of the page
If you need help on choosing a cable a detail explanation of each setting is explain at to bottom of the page.
Option Information
Feature
- Side A: Modular plug 8 conductor RJ45 Male High quality AMP connector
- Side B: Modular plug 8 conductor RJ45 Male High quality AMP connector
- Plating : Gold plated connector
- Number of pair : 4 Pair twisted cable shielded
- Conductor : 24 awg conductor diametre
- Jacket : PVC jacket
- Used with :Computer, Network Card, switches, Hubs, DSL/Cable Modems, Patch Panels, Routers, Modems and other twisted-pair applications.
- Speed : 350 MHZ
- Guarantee : 1 year
Connector A
Modular Plug 8 position RJ45
|
Connector B
Modular Plug 8 position RJ45
|
Option Information
Certification
we test all of you’re cable but if you want a certificate we can provide you with one
from the tester. On the certificate you will find information about length, Speed and Bert test and the cable wire table.
to have the certificate select Yes in the option box.
Crossing
Crossing of done by crossing green pair and orange pair it is use sometime to connect a hub to a hub. Normaly the cable pinout is from pin to pin.
pin 1 to pin 3
pin 2 to pin 6
pin 3 to pin 1
pin 4 to pin 4
pin 5 to pin 5
pin 6 to pin 2
pin 7 to pin 7
pin 8 to pin 8
If you need a Crossing in you’re cable the select Yes in the option box
Labels
We can also provide you with labels at both ends of the cable.
these labels are made with shrink tubing and very durable.
You must send us a Email with the part number that you want us to print
If you want this option then select Yes in the option box.
|
Labels
|
Rubber Boot
Choose this option if you want rubber boots over the connector.
TIA/EIA-586A or 586B
Most CAble are maid with the 568A standart, there is non difference in connection except the green pair and the orange pair are interchange.
In 568A the pin 1 of the connector will have the white and green wire and in the 568B it will have the white and orange wire in the position 1.
If you want this option then select it in the option box. |
